level2-0010

Digital Print Solutions

Digital Print Solutions : Copiers : Xerox 3030 Engineering Copier

print email

Xerox 3030 Engineering Copier

A Powerful Package: Productivity Where You Need It... When You Need It. The Xerox 3030 is a point-of-need plain-paper copier with powerful productivity features.

Request more information

It's compact and environmentally friendly. The 3030 gives you walk-up convenience, automatic operation and a clear, easy-to-use graphic interface. Taking full advantage of the 3030's functionality is as simple as pushing a few buttons.

A World Of Copying Options--At The Point Of Need

Copy from original drawings, bluelines, sepias, CAD plots and cut-and-tape composites onto bond, vellum or film. Produce up to 15 copies from a single feed. Select automatic Synchro-cut or key in specific cut length. The 3030 makes size-for-size copies up to 36 inches wide by any manageable length at a speed of four D-size copies per minute.

Roll-Fed Media Loading Is Quick And Easy

The Quality Of Your Information Is Directly Related To The Quality Of Your Documents. You can be sure that your documents will be crisp and clear, because the Xerox 3030 uses high-quality xerographic imaging technology. Restore old drawings (opaque, translucent, paste-ups, bluelines) to "like new" condition, with the added storage and handling benefits of plain-paper media. The 3030 gives you added control of copy quality in terms of contrast and density. The 3030 protects your investment in information and helps you maintain the quality of your documents over the long haul.

Key Features

  • Compact footprint (57 inches wide by 27 inches deep) 115 volt, 20 amp power requirements
  • LED status display and control panel with easy-to-understand dual-language message display and straightforward user interface graphics
  • Built-in Auditron lets you track usage by specific job or project
  • Attractive appearance and quiet operation.
  • Throughput
  • Presentation-quality engineering copies on bond, vellum or film up to 36 inches wide by any manageable length
  • Up to 15 copies from a single original up to 36 inches by 60 inches
  • Up to 6 C-size, 4 D-size or 2 E-size prints per minute
  • One roll of 36" by 500' bond or vellum, or 36" by 150' drafting film

Versatility

  • Input documents - original drawings, bluelines, sepias and fragile documents, such as cut-and-tape composites, on opaque and translucent media, and rigid originals up to 1/8-inch thick
  • Output media - bond, vellum or film - manual bypass feature for special media requirements
  • Select lead edge and/or trail edge to create margins for applications such as binding or three-hole punching

Additional Features

  • Interactive dual-language message display communicates the status of the copier and display instructions for operation and maintenance
  • On-board electronic Auditron with capacity for 250 individual accounts in three modes: access control, assigned account, copy inhibit.
  • Partial copy enables users to reproduce only the data they need for a particular task. Only the portion containing the required data will be reproduced which will reduce the time and expense for reproduction.
  • In the "Sets" mode, prints are delivered in sequence to the copy stacker conveniently located in front of the 3030, all ready to either bind or staple

Accessories

  • Data Shuttle (requires shuttle installation kit)
  • Work Organizer
  • Long Document Guide
  • Portable Data Printer
  • Document Stacker

Key Specifications

Document Input

Maximum size

36" x 20' long in single copy mode; 36" x 60" long multicopy mode

Minimum size

8 1/2" x 11" (portrait)

Types

Opaque, translucent and transparent documents. Note: A document carrier (8R3628) is recommended for damaged or very delicate documents

General

Warm-up time

Standby less than 3 minutes; cold start 5-7 minutes

First Copy Out Time (FCOT)

Less than 20 seconds D size (24" x 36")

Multiple copies

Selectable, 1-15 copies per document

Copy throughput

2 E size (36" x 48") per minute; 4 D size (24" x 36") per minute; 6 C size (18" x 24") per minute

Media type

20 lb. xerographic bond, 20 lb. xerographic Zero Solvent vellum and .004 drafting film

Media Supply

Roll stock selectable from one on-line feed roll; either 36" x 500' bond or vellum or 36" x 150' .004 drafting film. (Manual bypass for special media applications)

Product size

Height 46.25"; Width 57"; Depth 27"; Weight: 500 lbs

Installation Space

105" x 87"

Agency approvals

UL and CSA

Power Requirements

115 VAC/20 amp dedicated line

All brand and product names are trademarks of their respective companies. Technical information in this document is subject to change without notice.

Request more information